ACT Street (Full Face Sprung) Clutch Kit | 16-22+ Civic 1.5T, Si, 23+ Integra

Fits:

• 2022+ Honda Civic 1.5T Manual
• 2022+ Honda Civic Si (Coupe, Sedan)
• 2016 - 2021 Honda Civic 1.5T Manual
• 2017 - 2020 Honda Civic Si
• 2023+ Acura Integra Manual

_______

It's no secret that clutch kits have been a hit or miss (mostly miss) on the Civic 1.5T platform, hence we did not offer one until now till we did our own testing to verify what works well rather than selling a hotly anticipated item early, and finding issues later.

Having broken-in carefully at first, then all sorts of daily driving, performing several WOT pulls, and even two full track days on the ACT HC10-HDSS Kit, we are confident after 3,000 miles of use that this clutch kit will perform well on your 2016+ Honda Civic 1.5T with the Manual Transmission. The clutch pedal is mildly stiffer than the factory feel; solid engagement but not heavy enough to call it a "leg day" type of clutch. The less rotating inertia from the 17.6lbs flywheel (32.5lbs factory flywheel) means that revs rise up, and drop much faster, making this engine a lot less lazy, and more lively!

No chatter to report, and rev hang has been completely eliminated. ACT does have other 4 and 6-puck clutch kits, which we're choosing not to offer yet since they are race kits with shorter life span that are tricky to drive daily, plus we haven't tested that kit. Our Blue Si is FBO and puts power down with ease, and we have seen others in the community running big turbo setups with this kit, and don't have any issues.

Here's what's included in the box

• ACT 17.6lbs Single Mass Aluminum Flywheel (factory flywheel is a Dual Mass 32.5lbs unit)
• ACT Full Face Sprung Clutch Disc
• ACT Pressure Plate
• Alignment Tool
• Pilot Bushing
• Release Bearing
• Instructions

Specs:

• Total Weight: 33lbs
• Torque Capacity: 363ft/lbs (63% better than factory)
• Disc Material: Organic

Check out all our pictures of the kit being weighed and installed. 

On our Blue Si, this kit is paired up with the upgraded Clutch Master Cylinder (KzCMC), and PRL SS Clutch Line - Clutch Delay Valve (CDV) Delete also performed. Although it is NOT a must to perform either of these upgrades/modifications, however IF you will be racing, and trying to shift quickly at redline then you may encounter what is known as "Lockout". It has been well-documented that the factory components may lead to a lockout situation, not letting you shift as fast as you desire. "Lockout" is not the clutch kit's fault, it's the factory Clutch Master Cylinder that may struggle to generate enough hydraulic pressure to engage and disengage ANY heavy duty clutch quickly. You can still run this kit without those upgrades if you so choose to do so, it will not harm your clutch kit either way.

We are still using the ACT Throw-out Bearing with our Si that is included in the kit, and for warranty purposes it MUST be used. Some will prefer to use the OEM Throw-out bearing, that would be your choice but please understand that it may complicate any warranty matters since ACT states that all their components must be used.