Passer aux informations produits
1 de 3

SPC Performance

SPC Performance Steel Rear Camber Kit | 16-22+ Civic, 23+ Integra

SPC Performance Steel Rear Camber Kit | 16-22+ Civic, 23+ Integra

Prix habituel $259.90 USD
Prix habituel Prix soldé $259.90 USD
Vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Earn 1 Point on this purchase. Learn more

Fits:

  • 2016 - 2021 Honda Civic Base (Coupe, Hatch, Sedan)
  • 2017 - 2020 Honda Civic Si (Coupe, Sedan)
  • 2022+ Honda Civic Base (Sedan, Hatch)
  • 2022+ Honda Civic 1.5T (Hatch, Sedan)
  • 2022+ Honda Civic Si (Sedan)
  • 2023+ Acura Integra (Base, A-spec)

Note: sold as a pair, quantity 1 includes both sides.

_______

A common result of lowering your 2016+ Honda Civic is throwing the rear Camber alignment off spec, and the factory arms will not be able to correct it as they lack the adjustment range (-1 to +1). Poor alignment will cause uneven tire wear, and bad handling characteristics.

SPC Performance's Rear Camber Kit allows for a greater, more precise Camber adjustment range (-3 to +3) for your lowered 10th Generation Honda Civic. These arms are compatible for all Civic trims, excluding the Civic Type R.

 

Afficher tous les détails

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David Demmitt
Very high quality part!!! fully adjustable!!!

A must have upgrade if you’re lowering your car! Very high quality and a fairly easy install except on the drivers side the one bolt is a very tight fit up against the gas tank and sub frame. Very difficult to get the wrench on it no room to work and the more you back the bolt out the tighter the space gets. At least that’s how it is on the 11th gen SI and I know it’s even harder on earlier generations. But let me be clear this is absolutely not unity’s fault at all nor really SPC, the fault falls on Honda for their design. Because getting the OEM camber bar off is the real issue!!! The only thing SPC could have done if they wanted to make the install easier is to make both end’s adjustable. That way you could turn it to get clearance in order to slide in the bolt! But as they are they are a great product that I would buy again and I am very happy to recommend to others!!! I am a Honda Technician and I highly recommend this camber kit it is leaps and bounds better than other budget brands!!! You can see and feel the difference in strength and quality when you remove the oem bar and hold it up with a SPC bar! Which by the way i highly recommend so you can pre adjust your new Camber arm before installing! I did that and when I threw it on the alignment rack the only adjustments needed was some slight toe!!! Thanks Humza for hooking me up with another quality product!!!

David, love your insightful reviews that you've been submitting for all your purchases brother! In the few months we've known each other, I already get a sense that you must now be the go-to guy to ask about mods for the 11th Gen Si! The build continues to progress and by now you've got yourself a sweeeeeet handling car! Have a great week :)

Humza

B
Brian Doran
Fixed Alignment issue

After installing my lowering springs, the rear wheels could not be aligned. The stock camber arms did not allow enough adjustment. These took care of the issue. A huge thanks to Humza for overnighting these to me!

Thank you Brian! Glad that we could work together on overnighting these to you right in time for your appointment :)

Hope you enjoy this setup for years to come!

Humza

C
Codie Bell
Camber kit

Simple to install and very easy to adjust. I was able to correct all of my suspension geometry with these installed on my sedan. Overall construction is fantastic, huge Improvement over the stock stamped steel arms.