SPC Performance Steel Upper Rear Camber Kit | 16-22+ Civic 1.5T & Si, 23+ Integra A-Spec

I installed these when i put my Swift lowering springs on my car. The install was a little tough but totally worth it. I was able to get my rear camber back to factory spec after lowering, which saves you from chewing up tires. They feel solid and (to my knowledge) haven't come out of alignment on me, even with multiple autocross sessions. Definitely a must have unless you like that goofy cambered-iut look!

This is a must need when you are lowering your car! When I lowered my car my rears were rubbing. This was fixed by installing the SPC camber arms. It gives you the perfect negative camber to prevent rubbing and for that sweet stanced look. Shout out to Humza for being helpful in choosing what to use for my build.

5/5 for these arms. Lowered on H&R Supersport springs some camber arms were a must do for the rear of the car. Being able to dial in the camber makes a huge difference with the fitment & handling. Must do if you plan on lowering on anything over an inch, would recommend regardless for any type of style; to help dial the camber in for spirited driving or that stanced negative camber look!

A must have upgrade if you’re lowering your car! Very high quality and a fairly easy install except on the drivers side the one bolt is a very tight fit up against the gas tank and sub frame. Very difficult to get the wrench on it no room to work and the more you back the bolt out the tighter the space gets. At least that’s how it is on the 11th gen SI and I know it’s even harder on earlier generations. But let me be clear this is absolutely not unity’s fault at all nor really SPC, the fault falls on Honda for their design. Because getting the OEM camber bar off is the real issue!!! The only thing SPC could have done if they wanted to make the install easier is to make both end’s adjustable. That way you could turn it to get clearance in order to slide in the bolt! But as they are they are a great product that I would buy again and I am very happy to recommend to others!!! I am a Honda Technician and I highly recommend this camber kit it is leaps and bounds better than other budget brands!!! You can see and feel the difference in strength and quality when you remove the oem bar and hold it up with a SPC bar! Which by the way i highly recommend so you can pre adjust your new Camber arm before installing! I did that and when I threw it on the alignment rack the only adjustments needed was some slight toe!!! Thanks Humza for hooking me up with another quality product!!!

After installing my lowering springs, the rear wheels could not be aligned. The stock camber arms did not allow enough adjustment. These took care of the issue. A huge thanks to Humza for overnighting these to me!