Ir directamente a la información del producto
1 de 7

PRL Motorsports

PRL High Volume Intake (HVI) | 22+ Civic 1.5T, Si, 23+ Integra

PRL High Volume Intake (HVI) | 22+ Civic 1.5T, Si, 23+ Integra

Precio habitual $399.99 USD
Precio habitual $399.99 USD Precio de oferta $399.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Earn 1 Point on this purchase. Learn more
Optional Lower Duct

Fits:

  • 2022+ Honda Civic 1.5T
  • 2022+ Honda Civic Si
  • 2023+ Acura Integra (Base, A-spec)

Note: no ECU tuning required. 10HP gains!

_______

PRL's 11th Gen Civic 1.5T High Volume Intake system utilizes a 4" oiled cone filter and 1-piece High Volume MAF housing to allow maximum airflow while delivering proper fuel trims. The HDPE rotomolded air box attaches to our supplied High Volume Inlet Air Duct and utilizes the factory air guide + seal for optimal airflow and heat-soak reduction. Custom molded 4-ply silicone with receiving grooves allows for all components to be safely attached without obstructing airflow. Customers can also access the air filter for maintenance without removing the air box!

Kit Includes:

  • (1) High Volume Air Box Assembly
  • (1) High Volume Intake Inlet Air Duct
  • (1) High Volume MAF Housing Assembly
  • (1) 4" ID Oiled Cone Filter
  • (1) 4-Ply Silicone Intake Hose
  • (2) 304 Stainless Steel Worm Drive Hose Clamps
  • (2) 304 Stainless Steel Mounting Brackets
  • (2) Rubber Grommets,
  • (1) Post Mount
  • (3) OE-Style Push-Through Clips
  • Stainless Hardware/Bolts


Optional: Lower Duct for drawing in more air

The High Volume "Plus" Cold Air Intake Duct is transforms our standard High Volume Intake System into a true cold air intake by introducing cool air through the inner fender liner, which increases airflow and lowers intake air temperatures. This design also increases intake system efficiency when driving in low pressure (drafting) zones.  The HDPE rotomolded duct also helps to reduce heat-soak. 

Kit Includes:

  • (1) High Volume Intake "Plus" Cold Air Intake Duct
  • (1) 4-Ply Silicone Intake Hose
  • (2) 304 Stainless Steel Worm Drive Hose Clamps
  • (1) 304 Stainless Steel Mounting Bracket
  • Stainless Hardware/Bolts


        Ver todos los detalles

        Customer Reviews

        Based on 3 reviews
        100%
        (3)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        B
        Brandon Burchfield
        Great intake

        Pair this up with the PRL Titanium Turbocharger Inlet Pipe Upgrade Kit and your intake is good to go! Butt dyno says it makes a difference in power, but perhaps more importantly, it sounds really nice. Add in the PRL Intercooler Piping Kit to get rid of that dumb stock intercooler resonator and you'll really hear the turbo after that.

        Very pleased with everything and the owner of Unity, Humza, is a really great dude too!

        M
        Mods
        Lots of mods

        This is a legitimate website! And the guy is super helpful

        J
        Jeremy Medina
        Great service as always

        Been back and forth with Humza about this intake for a while, finally ordered it he shipped it as soon as possible always great service everytime i order parts

        As for the intake i found that the clips break easily and fitment good but u have to ensure to place the brackets in the angle and placement or else there will be fitment issues theres some turbo noise but not as loud since its in a small case i like how the intake is place a bit higher so it prevents it from either getting splash by snow or water overall pregood intake